Message Passing Interface (MPI) FAQ
Shane Hebert, shane@erc.msstate.edu
Last modified: Wed May 29 11:32:59 1996
This is the list of Frequently Asked Questions about the MPI (Message
Passing Interface) standard, a set of library functions for message
passing. For a list of the latest changes to this document, see sec-
tion ``What's New?''. Comments on the FAQ are welcome. See question
``Formats'' for details of where to get the PostScript, Emacs Info,
HTML, and text versions of this document.
1. Introduction and General Information
This FAQ attempts to answer basic questions regarding MPI. Pointers
to further information on MPI are included for those wishing to know
more.
1.1. What is MPI?
MPI stands for Message Passing Interface. The goal of MPI, simply
stated, is to develop a widely used standard for writing message-
passing programs. As such the interface attempts to establish a
practical, portable, efficient, and flexible standard for message
passing.
In designing MPI the MPI Forum sought to make use of the most
attractive features of a number of existing message passing systems,
rather than selecting one of them and adopting it as the standard.
Thus, MPI has been strongly influenced by work at the IBM T. J. Watson
Research Center, Intel's NX/2, Express, nCUBE's Vertex, p4, and
PARMACS. Other important contributions have come from Zipcode, Chimp,
PVM, Chameleon, and PICL.
The main advantages of establishing a message-passing standard are
portability and ease-of-use. In a distributed memory communication
environment in which the higher level routines and/or abstractions are
build upon lower level message passing routines the benefits of
standardization are particularly apparent. Furthermore, the
definition of a message passing standard provides vendors with a
clearly defined base set of routines that they can implement
efficiently, or in some cases provide hardware support for, thereby
enhancing scalability.
Source: MPI Document - <http://www.mcs.anl.gov/mpi/mpi-
report-1.1/mpi-report.html>.
1.2. What is the MPI Forum?
Message Passing Interface Forum
The Message Passing Interface Forum (MPIF), with participation from
over 40 organizations, met from November 1992 to April 1994 to discuss
and define a set of library interface standards for message passing.
Version 1.0 of the standard was released on May 5, 1994. Beginning in
March, 1995, the MPIF reconvened to correct errors and make
clarifications in the MPI document of May 5, 1994. These discussions
resulted in Version 1.1 (dated June, 1995) which contained only minor
changes from Version 1.0. MPI-2 meetings began April, 1995 and have
been meeting every six weeks. For more information on the MPI-2
process, see the section on the MPI-2 effort (Section ``MPI-2'').
The MPIF is not sanctioned or supported by any official standards
organization.
Source: MPI Document - <http://www.mcs.anl.gov/mpi/mpi-
report-1.1/mpi-report.html>.
1.3. A Brief History of MPI
The MPI standardization effort involved about 60 people from 40
organizations mainly from the United States and Europe. Most of the
major vendors of concurrent computers were involved in MPI, along with
researchers from universities, government laboratories, and industry.
The standardization process began with the Workshop on Standards for
Message Passing in a Distributed Memory Environment, sponsored by the
Center for Research on Parallel Computing, held April 29-30, 1992, in
Williamsburg, Virginia. At this workshop the basic features essential
to a standard message passing interface were discussed, and a working
group established to continue the standardization process.
A preliminary draft proposal, known as MPI1
<ftp://netlib2.cs.utk.edu/mpi/mpi1.ps>, was put forward by Dongarra,
Hempel, Hey, and Walker in November 1992, and a revised version was
completed in February 1993. MPI1 embodied the main features that were
identified at the Williamsburg workshop as being necessary in a
message passing standard. Since MPI1 was primarily intended to promote
discussion and ``get the ball rolling,'' it focused mainly on point-
to-point communications. MPI1 brought to the forefront a number of
important standardization issues, but did not include any collective
communication routines and was not thread-safe.
In November 1992, a meeting of the MPI working group was held in
Minneapolis, at which it was decided to place the standardization
process on a more formal footing, and to generally adopt the
procedures and organization of the High Performance Fortran Forum.
Subcommittees were formed for the major component areas of the
standard, and an email discussion service established for each. In
addition, the goal of producing a draft MPI standard by the Fall of
1993 was set. To achieve this goal the MPI working group met every 6
weeks for two days throughout the first 9 months of 1993, and
presented the draft MPI standard at the Supercomputing 93 conference
in November 1993. These meetings and the email discussion together
constituted the MPI Forum, membership of which was and continues to be
open to all members of the high performance computing community.
Beginning in March, 1995, the MPIF reconvened to correct errors and
make clarifications in the MPI document of May 5, 1994. These
discussions resulted in Version 1.1 (dated June, 1995) which contained
only minor changes from Version 1.0. MPI-2 meetings began April, 1995
and have been meeting every six weeks. For more information on the
MPI-2 process, see the section on the MPI-2 effort (Section
``MPI-2'').
Source: MPI Document - <http://www.mcs.anl.gov/mpi/mpi-
report-1.1/mpi-report.html>.
1.4. The MPI-1 Document
There are three versions of the MPI document: version 1.0 (dated May
5, 1994), version 1.1 (dated June, 1995), and version 1.1 marked to
show the changes from version 1.0 to version 1.1.
o Version 1.1 (June 12, 1995)
Version 1.1 (June 12, 1995) of the MPI Document is available on-
line as HTML at <http://www.mcs.anl.gov/mpi/mpi-report-1.1/mpi-
report.html>. It is also available as postscript from the
following locations:
o <ftp://ftp.mcs.anl.gov/pub/mpi/mpi-1.jun95/mpi-report.ps>
o <ftp://ftp.erc.msstate.edu/pub/mpi/docs/mpi-report1.1.ps>
o Version 1.1 (June 12, 1995) with Changes Marked
A copy of version 1.1 with changes from version 1.0 marked in the
margins as available from:
o <ftp://ftp.mcs.anl.gov/pub/mpi/mpi-1.jun95/mpi-report.marked.ps>
o <ftp://ftp.erc.msstate.edu/pub/mpi/docs/mpi-report.marked.ps>
o Version 1.0 (May 5, 1994)
The official postscript version of the document can be obtained
from netlib at ORNL by sending a mail message to netlib@ornl.gov
with the message "send mpi-report.ps from mpi".
It may also be obtained by anonymous ftp from the following sites:
o <ftp://netlib2.cs.utk.edu/mpi/mpi-report.ps>
o <ftp://ftp.erc.msstate.edu/pub/mpi/docs/mpi-report.ps.Z>
o <ftp://info.mcs.anl.gov/pub/mpi/mpi-report.ps.Z>
2. Online Resources
2.1. WWW Sites
Argonne National Laboratory <http://www.mcs.anl.gov/mpi>
The Argonne National Laboratory MPI page is the home site of the
MPICH implementation and holds the HTML version of the MPI
standard document. It also has pointers to many other sources of
MPI-related information.
Australian National University
<http://cap.anu.edu.au/cap/projects/mpi/mpi.html>
The Australian National University site contains information on
the implementation of MPI on the Fujitsu AP1000 multicomputer
located at the Australian National University as well as various
links to other MPI information.
Mississippi State University <http://www.erc.msstate.edu/mpi/>
Contains pointers to MPI resources on the Web. Home site of the
MPI FAQ.
Netlib <http://www.netlib.org/mpi/>
Netlib has a fairly large repository of MPI information. It
contains such items as the original MPI1 proposal, minutes from
several of the MPI Forum meetings, as well as the mail archives
of the MPI discussion mail lists.
Oak Ridge National Laboratory
<http://www.epm.ornl.gov/~walker/mpi/>
Oak Ridge maintains a well-organized resource center for MPI-
related materials.
Ohio Supercomputing Center <http://www.osc.edu/lam.html>
The Ohio Supercomputing Center page is the home location for
information about LAM, one of the public domain MPI
implementations. They have also started a series of quick
tutorials.
2.2. Newsgroup
An MPI-specific newsgroup, comp.parallel.mpi was created by a vote of
506 to 14. The RFD for comp.parallel.mpi was originally posted to
comp.parallel, comp.parallel.pvm, and news.announce.newgroups on April
4, 1994. The CFV was issued June 15, 1994. The voting results, RFD,
and CFV can be retrieved by anonymous ftp from ftp.erc.msstate.edu as
pub/mpi/newsgroup/result, pub/mpi/newsgroup/rfd and
pub/mpi/newsgroup/cfv.
2.3. Implementations
Many of the MPI WWW pages have information about the various MPI
implementations. The Ohio Supercomputing Center is attempting to
maintain a comprehensive list of implementations at
<http://www.osc.edu/mpi/>. Information such as the supplier, current
version, help contact, etc. can be found there.
3. MPI-2
3.1. MPI-2 Status
It was decided at the final MPI-1 meeting (Feb. 1994) that plans for
extending MPI should wait until people have had some experience with
the current version of MPI. The MPI Forum held a BOF session at
Supercomputing '94 to discuss the possibility of an MPI-2 effort. A
decision was made to begin MPI-2 meetings in April of 1995. These
meetings have been held approximately every six weeks since then.
Current plans are to have a public draft ready for distribution at
Supercomputing '96.
3.2. What features will be included in MPI-2?
Currently, the MPI-2 Forum consists of eight subcommittees:
o Dynamic Process Management
o One-Sided Communication
o Extended Collective Operations
o External Interfaces
o Miscellaneous Topics
o Parallel I/O
o Realtime Extensions
o Language Bindings (C++ and Fortran-90)
Other subcommittees may appear. The realtime and I/O subcommittees
are additions that have been added since the MPI-2 process began.
In MPI-1, the most specific discussions took place on the the
subcommittee lists, where draft proposals were put together.
3.3. What mailing lists are being used for MPI-2?
If you want to participate in the discussion of a particular MPI-2
topic, send mail to majordomo@mcs.anl.gov containing:
subscribe <list-name>
The current mailing lists include:
mpi-comm@mcs.anl.gov MPI Forum discussion list, all comments welcome
mpi-core@mcs.anl.gov MPI forum meeting attendees list
mpi-dynamic MPI Forum discussion list for dynamic process management
mpi-1sided MPI Forum discussion list for one-sided communication
mpi-coll MPI Forum discussion list for collective operations
mpi-external MPI Forum discussion list for external interfaces
mpi-bind MPI Forum discussion list for C++ and Fortran-90 bindings
mpi-realtime MPI Forum discussion list for real-time extensions
mpi-io MPI Forum discussion list for I/O
3.4. Where are the MPI-2 mailing lists archived?
The MPI-2 mailing lists are archived using hypermail. These archived
mailing lists can be retrieved from
<http://parallel.nas.nasa.gov/MPI-2/>.
3.5. Where is the current MPI-2 draft document?
The MPI-2 draft document is in a constant state of flux. For up-to-
date information, it's recommended that in addition to viewing the
draft document, you follow the discussions on the MPI-2 mailing lists
and consult the minutes of the MPI-2 meetings. The current draft can
be retrieved from
<http://www.cs.wisc.edu/~lederman/mpi2/mpi2-report.ps.Z>
3.6. Where can I find out more about MPI-2?
More information on MPI-2 is available from
<http://www.erc.msstate.edu/mpi/mpi2.html> and
<http://www.mcs.anl.gov/Projects/mpi/mpi2/mpi2.html>. These sites
contain information about upcoming meetings, minutes from previous
MPI-2 meetings, etc.
4. Administrative Information and Acknowledgments
4.1. Recent changes to the FAQ
o Changed the format of the FAQ.
4.2. Formats in which this FAQ is Available
This document is available as ASCII text, an Emacs Info document,
PostScript, and HTML. It is also available on the world wide web
(WWW) at <http://www.erc.msstate.edu/mpi/mpi-faq.html> or at
<http://www.cis.ohio-state.edu/hypertext/faq/usenet/mpi-faq/faq.html>
The text, Emacs Info, HTML, and Postscript versions are generated
automatically by Linuxdoc-SGML, a text-formating package based on SGML
used by Linux Documentation Project. Information on Linuxdoc-SGML can
be found at <http://www.informatik.tu-muenchen.de/~schwarz/linuxdoc-
sgml/>.
The output files mpi-faq.txt, mpi-faq.info, mpi-faq.html, mpi-faq.ps,
and mpi-faq.sgml are available at
<ftp://ftp.erc.msstate.edu/pub/mpi/faq>. A tarfile (mpi-
faq.source.tar.gz) also is available which contains all of these
files.
4.3. Where can I get a copy of this FAQ?
In addition to finding it in those places listed in question
``Formats'', the text version is posted monthly to comp.parallel.mpi,
news.answers, and comp.answers.
The text version is also available through anonymous ftp from
<ftp://rtfm.mit.edu/pub/usenet/news.answers/mpi-faq> or those without
FTP access can send e-mail to mail-server@rtfm.mit.edu with "send
usenet/news.answers/mpi-faq" in the message body.
4.4. Disclaimer and Copyright
Note that this document is provided as is. The information in it is
not warranted to be correct; you use it at your own risk.
Last-modified: 27 Nov 1996 22:19:13 GMT